SPARK PE
Polyethylene Sheet, Clear Type
Conforms to ASTM C-171
ASTM D-2103
Thickness : 0.004 or 4 mils (minimum)
ASTM C-156
Moisture Loss : 0.055 gm/cm² (maximum)
ASTM D-882
Longitudinal Direction : 11.70 MPa (minimum) / 225% (minimum)
Transverse Direction : 830 MPa (minimum) / 350% (minimum)
SPARK PE acts as a permanent moisture barrier under concrete slab floors. It is used in porous or absorbent ground in order to retain water in concrete. It is also used for the protection of floors against moisture, oil and other hazards.
Width : 2 meters
Thickness : Coverage
4 mils (0.004 inch) : 10.43 sq. m. / kg.
6 mils (0.006 inch) : 6.95 sq. m. / kg.
8 mils (0.008 inch) : 5.21 sq. m. / kg.
10 mils (0.010 inch) : 4.18 sq. m. / kg.
SPARK PP
Polypropylene Sheet, Clear Type
Conforms to ASTM C-171
ASTM D-2103
Thickness : 0.004 or 4 mils (minimum)
ASTM C-156
Moisture Loss : 0.055 gm/cm² (maximum)
ASTM D-882
Longitudinal Direction : 11.70 MPa (minimum) / 225% (minimum)
Transverse Direction : 830 MPa (minimum) / 350% (minimum)
SPARK PP acts as a permanent moisture barrier under concrete slab floors. It is a Polypropylene film which has been calendered into a sheet of uniform thickness. It is used in porous or absorbent ground in order to retain water in concrete, thus, eliminating quick drying out. It is also used for the protection of floors against moisture, oil and other hazards.
Packaging : 4 ft. x 50 meters / roll
